نتایج جستجو برای: Molar Ratio
تعداد نتایج: 530958 فیلتر نتایج به سال:
the influence of increasing the sio2/k2o molar ratio on the electrochemical action of a waterbornepotassium silicate zinc-rich coating was investigated by means of electrochemical impedancespectroscopy (eis) and corrosion potential (ecorr) measurements. the eis results showed thatincreasing the sio2/k2o molar ratio in the range of 3.135 to 5 by the addition of nano-sio2 to theresins improved th...
A proton NMR method for the drtermination of salvation numbers of alkaline earth cations with hexamethyl phosphoramide (HMPA) in nitromethane (NM) as diluents is described. The method is based on monitoring the resonance frequency of HMPA protons as a function of HMPA / metal ion molar ratio at constant metalion concentration. The average salvation number of cations, , at any HMPA / metal ...
a proton nmr method for the drtermination of salvation numbers of alkaline earth cations with hexamethyl phosphoramide (hmpa) in nitromethane (nm) as diluents is described. the method is based on monitoring the resonance frequency of hmpa protons as a function of hmpa / metal ion molar ratio at constant metalion concentration. the average salvation number of cations, , at any hmpa / metal ion ...
The slurry polymerization of ethylene was studied by employing a (TiCl4/Mg(OEt)2/TEA) catalyst system in hexane. The effects of triethylaluminum concentration and temperature on polymer yield and polymer viscosity average molecular weight, Mv, were investigated. The maximum polymer yield was obtained at an Al/Ti molar ratio of 124. The highest yield and Mv were achieved at 60 °C. The concentrat...
Ilmenite is a valuable industrial mineral containing Fe and Ti elements. Two composites with different morphology and composition were produced using the reaction of synthesized ilmenite and aluminum. The molar ratios of 1:2 and 1:8 were selected. The critical temperatures of each molar ratio were determined using the Differential Thermal Analysis (DTA). The heat treatment of the systems ...
In this study, the effect of Fe/Ba molar ratio was investigated on the phase composition, synthesis temperature, microstructure and magnetic properties of barium hexaferrite prepared via mechanical activation. In order to synthesize this compound, Fe/Ba molar ratios of 12 and 6 were used. The effect of Fe/Ba molar ratio, milling time and heat treatment temperature for achieving the optimal cond...
Abstract : In-situ process is one of the biodiesel production methods in which seeds are used directly in the reaction without oil extraction. The objective of this research is to optimize the biodiesel production conditions for the in-situ reaction using tomato seeds as a feed. The effects of reaction parameters such as molar ratio of oil to alcohol and catalyst to oil weight percent ratio on ...
Renewable energy sources are developed worldwide, owing to high oil prices and in order to limit greenhouse gas emissions. The objective of this research was to study the feasibility of biodiesel production from mountain almond (Prunus Scoparia) oil using ultrasonic system and optimization of the process using Artificial Bees Colony (ABC) Algorithm. The results showed that by increasing the mol...
Shrinkage behavior of a geopolymer cement paste prepared from pumice-type natural pozzolan was studiedby changing parameters of chemical composition including SiO2/Na2O molar ratio of activator and total molar ratiosof Na2O/Al2O3, and H2O/Al2O3. For investigating the effect of curing conditions on shrinkage, hydrothermal curingwas also applied. The obtained results clearly revealed the governin...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید